Corrosion/Wear

Home Up Emergency Phone #'s Facility Links

 

 

 

 

 

KCC Corrosion Control

    KCC Corrosion Control is your primary source and home of the most advanced polymer technology for controlling corrosion. We stand ready and capable of meeting your most demanding requirements for:

bulletadvanced thermoplastic coatings
bulletthermosetting coatings
bullettank linings
bulletflooring systems
bullethigh strength machinery foundation grouts
bulletconcrete renovation systems
bulletjoint sealants & overlays
bulletelastomeric floor coves
bulletcrack-bridging containment linings

 

                            

                           

Before and after view of large Midwest Chemical plant. Elasti-liner® was applied directly over the existing cracked containment lining, which eliminated the expense of removing the old lining.

     KCC Thermocoat has pioneered, developed and patented the thermal bonding agents and basecoats and the technology that enables field application of thermoplastics. Tried in the past, with failing results, thermoplastic coatings required the substrate temperature to equal the melt index of the thermoplastic coating, that is until KCC Thermocoat developed the technology to allow flame or molten spray application to steel and concrete with ambient cold temperatures from 30°F (-1°C) to very warm ambient temperatures to 120°F (48.9°C) and even higher, (Please note that the warm ambient temperature stated has nothing whatsoever to do with the flame or molten spray application of thermoplastics, we are just stating minimum and maximum ambient weather condition ranges for thermoplastic application).

    Applied by sophisticated flame and molten spray technologies, KCC Thermocoat™ thermoplastic powder coatings are highly cost effective competing with far less capable coatings and paints for protection of structural steel and concrete structures. Our advanced thermoplastics have a far longer life, zero VOC's and all of these additional advantages:

Beat paints in life cycle cost analysis
Easily and simply repaired
Superior chemical resistance
Totally free of pinholes and defects

Virtually instant cure in any weather
Abuse and abrasion resistant
Lower cost installation, shorter elapsed schedule
Unlimited shelf life
Eliminate abrasive blasting and clean up		                    

 

Belden Brick Company           

    Belden shale and fire clay chemical resistant brick offer engineers a wide range of utility in environments that involve aggressive corrosive conditions and elevated temperatures.  Belden chemical resistant brick is a particularly versatile construction material for sulfuric acid plants when installed as linings for carbon steel shells.

Belden has won wide acceptance because of these key features:

bulletUsage flexibility without sensitivity to minor changes in chemical processes.
bulletCost Savings: where alloys are uneconomical because off accelerated chemical attack @ high temps, chemical resistant brick liners placed inside the vessel can lower temperatures and concentration levels making it feasible to use less expensive alloys.
bulletRepairability compared to the finite durability of alloys
bulletInsulation inside the vessel is less susceptible to damage than is external insulation.
bulletCooler operation reduces degree of external protection necessary for worker safety.

 

[ Home ] [ Corrosion/Wear ] [ Expansion Joints ] [ Filtration ] [ Foundry/Crucibles ] [ High Temperature Insulation ] [ Pumps ] [ Refractory & Brick ] [ Boiler Inspections/Study ] [ Boiler Engineering & Design ] [ Boiler Pressure Parts ] [ Boiler Upgrades/Modifications ] [ Scrubbers (WFGD), SCR's, Low NOx ] [ Heat Exchanger, Condenser, Feedwater ] [ MPS Mills & Mill Parts ] [ Boiler Construction & Plant Maintenance ]